Should you wish to receive some detailed information concerning our machines for the finishing of clothing textiles, please do not hesitate to contact us.

BEJIMAC provides machines for the following treatment processes:

• • Singeing

• • Washing & Scouring

• • Crabbing

• • Shearing

• • Pressing

• • Shrinking

• • Decatizing

• • Raising

• • Making-up

BEJIMAC is the only supplier to be able to provide singeing machines or singeing lines with two different types of burners.

Our FS direct flame bruner ensures the full regularity of the flame over the whole width of the fabric. Each burner can be adjusted independently in three singeing positions (through the fabric, radial or tangential), and so, it is suitable for any type of fabric (natural fibres and blends).

1. Tangential

2. Radial

3. Through the fabric

• • Zone A: Pre-drying by infra-red radiations

• • Zone B: Zone of influence of the flame

• • Zone C: After-burning zone

Our MF indirect flame bruner incorporating ceramics with a high energetic efficiency, procures a triple singeing effect : infrared pre-drying, singeing, post-singeing. Through its soft but efficient and long lasting action, it is therefore particularly well adapted to the singeing of 100% natural fibres (wool, cotton).

For the process of woven fabrics, our singeing line has a modular design with such options as brushing, beating, dust collection, cooling cylinders, impregnation, squeezing, plater or winding units and so on to allow every client to select only the necessary modules which are required by his particular production.

• • Feed-in unit with optional J-Box, for continuous process and driven cylinder for regular feeding through the singeing module.

• • Brushing module for removal of the dust by means of dust collectors with a slot covering the full width of the fabric. The achieved result is beyond expectation compared to the extraction from, a closed frame. For very dirty fabrics, we can supply this module with 4 brushes.

• • Water cooled cast iron burners (FS4 model), without expansive ceramics to be replaced regularly. No maintenance cost and continuous top quality flame.

• • Beating module, for removal of the dust by means of dust collectors with a slot covering the full width of the fabric. The achieved result is beyond expectation compared to the extraction from, a closed frame; it is also fitted with a stainless steel cyclone and a pneumatic sas for a maximum security and a continuous perfect suction at the two beaters. For very dirty fabrics, we can supply this module with 4 beaters.

• • Cooling unit before going into the impregnation vessel to supply the necessary basis for the accurate control of the liquor temperature and to avoid the mechanical deterioration of dome fibers, especially for technical fabrics.

• • Desizing department: no other desizing module has so much advantages that the Bejimac one.

  • – Switch from “wet to dry” or from “dry to wet” in a few seconds.

  • – Cleaning of the tank has never been so easy

  • – Plunged bearings without maintenance

• • Folding or winding unit at delivery.

Singeing machine for open width knitted fabrics

• • Feeding field with a 2 roller uncurling system and a driven spreading and centering device

• • 2 burners: direct (FS-LAS) or indirect (MF-LAS)

• • Beating and steaming/extinguishing unit
- delivery by folding unit
- very compact machine with built-in fully wired

• • Electrical cabinet and gas/air unit
- Width of burners : standard = 260 cm (other widths optional)